TE MATEnet Quad Port To LEONI Dacar Ethernet Cable

TE MATEnet quad port female connector, part number 2324319-1, A coded, black housing, factory built as either a quad port extension, a fan out to four MATEnet single port connectors, or a crossover fan out to four H-MTD single port connectors, on LEONI Dacar 647-4 fully shielded gigabit automotive Ethernet cable. The quad port carries four independent gigabit Ethernet channels. Five options cover every MATEnet quad port fan out and crossover need. Available in 7 lengths from 0.5 m to 5 m. Built for zonal architectures that need to break a MATEnet quad port out to four single port devices or extend a quad port link.

TE MATEnet is a multi port automotive Ethernet connector system. The quad port female, 2324319-1, carries four independent gigabit Ethernet channels in one black housing. When a zonal ECU uses a MATEnet quad port male pigtail, the four channels often need to fan out to four separate single port devices. Or the quad port link may need to extend between two ECUs. Or the fan out target may be an H-MTD device instead of another MATEnet device.This harness covers all those cases. The main end is always the MATEnet quad port female, 2324319-1. The other end is offered as another MATEnet quad port female, four MATEnet single port females, four MATEnet single port males, four H-MTD single port females, or four H-MTD single port males. The cable is LEONI Dacar 647-4, a fully shielded gigabit line built to hold 100 ohm differential impedance per channel.

Whether you are extending a MATEnet quad port link, fanning out to four MATEnet devices, or crossing over to four H-MTD devices, this harness has the configuration you need. Pick the option that matches the connectors on the other end.

Product Specifications

Available Configurations

MATEnet Quad Port to 4x MATEnet Single Port

One end is the MATEnet quad port female, 2324319-1, and the other end fans out to four MATEnet single port Z coded female connectors, part number 2302510-9, water blue.

Use it when the MATEnet quad port ECU has four channels that need to reach four separate MATEnet single port devices, such as four cameras or four radar sensors. Each single port female accepts a standard MATEnet single port male pigtail. The 0.5 m to 5 m range covers ECU to sensor routing.

MATEnet Quad Port to 4x MATEnet Single Port

One end is the MATEnet quad port female, 2324319-1, and the other end fans out to four MATEnet single port Z coded male connectors, part number 2302461-9, water blue.

Use it when the four MATEnet channels need to reach four devices with MATEnet single port female sockets. Each single port male plugs directly into a female socket. The 0.5 m to 5 m range covers ECU to sensor routing.

MATEnet Quad Port to MATEnet Quad Port

Both ends are the MATEnet quad port female, part number 2324319-1, black housing.

Use it as a quad port to quad port extension when a factory MATEnet quad port male pigtail is too short, or when bridging two quad port male pigtails between ECUs. The female to female gender keeps both factory pigtails unchanged. The 0.5 m to 5 m range covers zonal ECU to ECU routing.

MATEnet Quad Port to 4x H-MTD Single Port

One end is the MATEnet quad port female, 2324319-1, and the other end fans out to four H-MTD single port Z coded female connectors, part number E6K10A-1BZZ5-Z, water blue.

Use it when the MATEnet quad port ECU needs to connect to four H-MTD devices, such as H-MTD cameras or H-MTD radar sensors. This is a MATEnet to H-MTD crossover fan out. Each H-MTD female accepts a standard H-MTD male pigtail. The 0.5 m to 5 m range covers ECU to sensor routing.

MATEnet Quad Port to 4x H-MTD Single Port 

One end is the MATEnet quad port female, 2324319-1, and the other end fans out to four H-MTD single port Z coded male connectors, part number E6S10A-1BZZ5-Z, water blue.

Use it when the MATEnet quad port ECU needs to reach four H-MTD devices with H-MTD female sockets. Each H-MTD male plugs directly into an H-MTD female socket. This is a MATEnet to H-MTD crossover fan out with male on the device side. The 0.5 m to 5 m range covers ECU to sensor routing.

Applications 

Closing line: because all four channels run through factory terminated connectors on the same shielded Dacar 647-4 cable, all four gigabit links stay impedance matched end to end.

Professional Services

Fast sampling: small batch samples in days, production volumes on a confirmed lead time.

Length customization: 0.5 m to 5 m in stock. Non standard cut lengths built to your drawing.

Configuration customization: 5 options as shown. Other MATEnet and H-MTD combinations quoted on request.

Quality before dispatch: 100 percent per channel continuity and shielding continuity tested on every assembly before dispatch.

OEM and bulk support: zonal ECU developers, ADAS integrators and commercial vehicle makers get volume pricing and private label packaging.

Product FAQ

Q1: Is this a genuine TE MATEnet connector?

Yes. The MATEnet quad port female is genuine TE Connectivity, part number 2324319-1, A coded, black housing. The cable is LEONI Dacar 647-4 fully shielded gigabit automotive Ethernet.

Q2: Can you make custom lengths or connector combinations?

Yes. We support custom lengths from 0.5 m to 5 m and beyond, and can quote other MATEnet and H-MTD combinations on request. Send us your connector photos and target length, and we will quote the matching harness.

Q3: What is the difference between MATEnet and H-MTD ends?

MATEnet single port ends are water blue with a Z latch. H-MTD single port ends are also water blue but use a different connector interface and keying. Configs 4 and 5 cross over from MATEnet on the ECU side to H-MTD on the device side.

Q4: What is the difference between the five configurations?

Config 1 fans out to four MATEnet single port females. Config 2 fans out to four MATEnet single port males. Config 3 is quad port female to quad port female extension. Config 4 fans out to four H-MTD single port females. Config 5 fans out to four H-MTD single port males.