1. According to the complexity of the system
Single-channel system (such as a small stage, a single lighting chain): choose a single resistor terminator, such as SIRS-E CPoint (14.99) or aspectLED (14.99) or aspectLED (25.59) products, which are cost-effective.
Multi-channel/dual universe system (such as theme parks, building facade control): a dual resistor terminator is required, such as CPOINT's RJ45-DMXTERM-120-2U, to ensure independent termination of multiple data channels.
2. According to device compatibility
If the device follows the DMX512-A standard (such as most dimming consoles, LED lamps), a single resistor is sufficient.
If it involves special protocols or mixed-brand devices (such as Martin Cyclo series and Color Kinetics), it is necessary to confirm the device pin definition (refer to the wiring table on page 2), and give priority to dual resistors to cover different wiring requirements26.
3. Environmental and stability requirements
Long-distance transmission (>100 meters) or high-interference environment (such as outdoors): It is recommended to use a dual-resistance design, combined with a fully shielded cable (such as CPOINT's gold-plated contacts + shielding structure) to reduce signal attenuation by 610.
Temporary construction or low-cost projects: Single-resistance products (such as Amazon SIRS-E, $14.99) can meet the needs
