How to Choose M23 Hybrid Cable Assemblies for Servo Motors, Robots and Industrial Automation
M23 hybrid cable assemblies are used in industrial equipment where power, signal and Ethernet data need to be transmitted through one compact connection. For servo motors, robots, drive systems and automation equipment, a hybrid connector can reduce wiring space, simplify installation and improve maintenance efficiency.
📋 Contents
How to Choose M23 Hybrid Cable Assemblies for Servo Motors, Robots and Industrial Automation
M23 hybrid cable assemblies are used in industrial equipment where power, signal and Ethernet data need to be transmitted through one compact connection. For servo motors, robots, drive systems and automation equipment, a hybrid connector can reduce wiring space, simplify installation and improve maintenance efficiency.
This guide explains how to choose between two Premier Cable M23 hybrid cable assembly products: PCM-S-0747 and PCM-S-0748.
PCM-S-0747
PCM-S-0747 is a 2m M23 male-to-male hybrid cable assembly designed for direct device-to-device connection. It is suitable when both devices already have matching M23 interfaces, such as a servo drive and servo motor, robot module and control unit, or two automation devices.
PCM-S-0748
PCM-S-0748 is a 0.5m M23 female panel mount to open end cable designed for equipment that needs a fixed M23 connector on the machine housing or panel. The open-end wires are routed inside the equipment and can be soldered, crimped or connected by the customer according to the internal wiring layout.
Panel Mount Product Photo
Panel Mount Product Photo
Both products follow the M23 Power Signal Data Hybrid concept and are suitable for industrial applications that require compact, reliable and shielded transmission.
Why M23 Hybrid Cable Assemblies Are Used in Industrial Equipment
Modern automation systems often need to carry several electrical functions through one machine interface. A servo motor, robot joint or drive unit may require:
- Motor power
- Brake wiring
- Encoder feedback
- Sensor signals
- Control signals
- CAT5 Ethernet data
- Communication between drives and controllers
Using separate connectors for power, signal and data increases panel space, wiring complexity and installation time. An M23 hybrid connector and cable assembly combines these functions in one compact interface.
For equipment manufacturers, this can provide several practical advantages:
- Fewer connectors on the machine panel
- Cleaner cable routing
- Faster installation
- Easier maintenance
- Lower risk of wiring errors
- Better use of limited machine space
- Reliable transmission in harsh industrial environments
This is why M23 hybrid connectors are widely used in servo motors, robots, motion control systems, drive systems, industrial automation and transportation equipment.
Two M23 Hybrid Cable Assembly Options from Premier Cable
| Model | Product | Connector Structure | Cable Length | Main Use | Typical Application |
|---|---|---|---|---|---|
| PCM-S-0747 | M23 Male-to-Male Hybrid Cable Assembly | M23 male connector on both ends | 2m | Direct device-to-device connection | Servo motor, servo drive, robot module, automation equipment |
| PCM-S-0748 | M23 Female Panel Mount to Open End Cable | M23 female panel mount connector to open-end wires | 0.5m | Fixed panel interface with internal machine wiring | Motor housing, robot joint, control box, machine panel |
These two products serve different wiring scenarios. PCM-S-0747 is a finished external cable, while PCM-S-0748 is designed for equipment manufacturers who need a fixed external connector and flexible internal wiring.
Recommended Use Guide
| Requirement | Recommended Model |
|---|---|
| Direct connection between two M23 interfaces | PCM-S-0747, 2m M23 male-to-male hybrid cable |
| Servo drive to servo motor external wiring | PCM-S-0747 |
| Robot module to control unit connection | PCM-S-0747 |
| Drive system interconnection | PCM-S-0747 |
| Fixed connector on a machine panel or housing | PCM-S-0748, 0.5m M23 female panel mount to open end cable |
| Customer needs internal soldering or terminal connection | PCM-S-0748 |
| Robot joint internal wiring | PCM-S-0748 |
| Servo motor housing with internal wiring | PCM-S-0748 |
If both devices already have M23 mating connectors, PCM-S-0747 is usually the better choice. If one side needs to be mounted on the equipment housing and wired inside the machine, PCM-S-0748 is more suitable.
Product 1: PCM-S-0747 M23 Male-to-Male Hybrid Cable Assembly, 2m
M23 Male-to-Male Cable Assembly
The PCM-S-0747 is a 2m M23 male-to-male hybrid cable assembly with M23 male connectors on both ends. It is designed for applications where both devices already have standard M23 mating interfaces.
This product is commonly used for connecting servo drives, servo motors, robot modules, drive units and industrial automation equipment. It can transmit power, signal and CAT5 Ethernet data through one cable assembly, reducing the need for separate cables.
Key Features
| Item | Specification |
|---|---|
| Model | PCM-S-0747 |
| Product Type | M23 male-to-male hybrid cable assembly |
| Connector A | M23 male connector |
| Connector B | M23 male connector |
| Cable Length | 2m |
| Transmission Type | Power, signal and CAT5 Ethernet data |
| Installation Type | External device-to-device connection |
| Typical Use | Servo motors, drives, robots and automation equipment |
PCM-S-0747 Male-to-Male Cable Drawing
When to Choose PCM-S-0747
Choose PCM-S-0747 when both sides of the equipment already have matching M23 interfaces. This version is suitable for plug-in installation and external cable routing.
Typical use cases include:
- Servo drive to servo motor connection
- Robot module to control unit connection
- Drive system interconnection
- Industrial machine-to-machine wiring
- External automation equipment cable routing
- Motion control equipment
- Transportation and handling systems
Main Advantages
The PCM-S-0747 male-to-male cable is practical when the wiring route is fixed and the equipment interface is already defined. It helps reduce installation time, keeps external wiring clean and makes cable replacement easier during maintenance.
Product 2: PCM-S-0748 M23 Female Panel Mount to Open End Cable, 0.5m
The PCM-S-0748 is a 0.5m M23 female panel mount to open end cable designed for OEM equipment manufacturers who need a fixed connector interface on the outside of the machine and flexible wiring inside the equipment.
One side uses an M23 female panel mount connector, also called an M23 female receptacle, chassis mount connector or bulkhead connector. The other side is supplied as a 0.5m open-end cable with flying leads. The open-end wires can be soldered, crimped or connected to internal terminals by the customer.
This cable is often installed on a servo motor housing, robot joint, control box or machine panel. The open-end wires remain inside the equipment and can be connected to a PCB, terminal block, motor wiring, encoder module, brake circuit, sensor circuit or control board.
Key Features
| Item | Specification |
|---|---|
| Model | PCM-S-0748 |
| Product Type | M23 female panel mount to open end cable |
| Connector A | M23 female panel mount connector |
| Connector B | Open-end wires / flying leads |
| Cable Length | 0.5m |
| Installation Type | Panel mount / chassis mount / bulkhead mount |
| Internal Connection | Customer-side soldering, crimping or terminal connection |
| Typical Use | Motor housing, robot joint, control box and internal machine wiring |
PCM-S-0748 Panel Mount Drawing
When to Choose PCM-S-0748
Choose PCM-S-0748 when the connector needs to be mounted on the machine housing and the internal wiring must be completed inside the equipment.
Typical use cases include:
- Servo motor internal wiring
- Robot joint or robot arm wiring
- Control box internal connection
- PCB soldering
- Encoder feedback wiring
- Motor brake wiring
- Temperature sensor connection
- Internal power, signal and Ethernet distribution
Main Advantages
The PCM-S-0748 female panel mount open-end cable provides a standard M23 external interface while keeping the internal wiring flexible. It is useful for OEM machine builders whose PCB position, terminal location or internal wiring layout may vary between different equipment models.
M23 Power Signal Data Hybrid Connection
Hybrid connectors transmit power, signals and Ethernet data in one connection. The M23 Power Signal Data Hybrid connector and cable system provides a compact solution for industrial applications where multiple electrical functions must pass through one interface.
Depending on the selected configuration, the M23 hybrid connector can support:
- Up to 4+1 pin power transmission
- Current up to 30A
- Voltage up to 850V DC or 630V AC
- 6-pin signal transmission
- 4-pin CAT5 Ethernet data transmission
- Male and female connector interfaces
- Receptacles and cable assembly plugs
- IP67 protection when properly mated and installed
- 360° EMC shielding
- Anti-shock and vibration-resistant performance
The compact M23 plug-in connector is suitable for harsh industrial environments where stable power, signal and data transmission are required.
How to Choose the Right M23 Hybrid Cable Assembly
Selecting the right M23 hybrid cable depends on the equipment structure, connector interface and internal wiring method.
Choose PCM-S-0747 If:
- Both devices already have matching M23 interfaces
- You need a ready-to-use external cable
- The cable is used between a servo drive and servo motor
- The wiring route is fixed
- The cable needs to connect robot modules or drive units
- Fast installation and replacement are important
This version is best for direct equipment connection where no internal soldering or wiring modification is required.
Choose PCM-S-0748 If:
- The connector needs to be fixed on a machine panel or housing
- One side of the cable must be connected inside the equipment
- The customer needs to solder, crimp or terminate the wires
- The cable connects to a PCB, terminal block, motor wiring or internal module
- The product is used inside a servo motor, robot joint, control box or machine housing
This version is best for OEM machine builders who need a rugged external M23 interface and flexible internal wiring.
Servo Motors and Drive Systems
Servo motors and drive systems often require power transmission, brake wiring, encoder feedback, sensor signals and communication in a compact connection.
The PCM-S-0747 2m M23 male-to-male hybrid cable assembly is suitable for external drive-to-motor connection when both the servo drive and servo motor already have standard M23 interfaces.
The PCM-S-0748 0.5m M23 female panel mount to open end cable is suitable for servo motor manufacturers who need to mount a female M23 connector on the motor housing and connect the open-end wires inside the motor.
Typical wiring may include:
- Motor power
- Brake wiring
- Encoder feedback
- Temperature sensor signal
- Ethernet communication
- Servo drive control signal
Robots and Robotic Systems
Robotic systems require compact, reliable and vibration-resistant cable connections. M23 hybrid cable assemblies help transmit power, signal and data through one connector, reducing wiring complexity in robot systems.
The PCM-S-0747 2m male-to-male cable can be used between robot modules, control boxes, drive units and external equipment.
The PCM-S-0748 0.5m female panel mount to open end cable can be used in robot joints, robot arms or compact robotic modules where the connector is fixed on the housing and the open-end wires are connected inside the robot structure.
Typical robot applications include:
- Industrial robot arms
- Collaborative robots
- Robot joints
- AGV and AMR systems
- End-effectors
- Tool changers
- Robot control boxes
- Automated handling systems
Industrial Automation and Transportation Equipment
M23 hybrid cable assemblies are also suitable for automation and transportation systems where stable power, signal and Ethernet transmission are required.
The PCM-S-0747 2m male-to-male cable is suitable for external equipment interconnection. The PCM-S-0748 0.5m female panel mount to open end cable is better for customized internal wiring and fixed panel-mounted machine interfaces.
Typical applications include:
- Packaging machines
- CNC machines
- Conveyor systems
- Welding equipment
- Motion control systems
- Industrial control cabinets
- Automated transport equipment
- Handling systems
- Compact drive modules
- Factory automation equipment
Selection Checklist for Engineers and Buyers
Before choosing an M23 hybrid cable assembly, confirm the following details:
| Selection Point | What to Confirm |
|---|---|
| Cable Type | PCM-S-0747 2m male-to-male or PCM-S-0748 0.5m female panel mount to open end |
| Connector Interface | Male or female M23 connector, mating connector type |
| Mounting Method | Cable plug, panel mount, chassis mount or bulkhead mount |
| Cable Length | Standard 2m or 0.5m, or customized length |
| Internal Wiring | Connector-to-connector or open-end flying leads |
| Electrical Rating | Current, voltage and power configuration |
| Signal Requirement | Control signal, feedback signal or sensor signal |
| Data Requirement | CAT5 Ethernet transmission if required |
| Shielding | 360° EMC shielding for motors, drives and noisy environments |
| Protection Rating | IP67 requirement when properly mated and installed |
| Application | Servo motor, robot, drive system, control box or automation equipment |
Providing a wiring diagram, pin assignment or mating connector information can help confirm the correct cable assembly faster.
Information Needed for Quotation
To confirm the correct M23 hybrid cable assembly and provide an accurate quotation, please prepare the following information:
- Required model: PCM-S-0747 or PCM-S-0748
- Required cable type: 2m male-to-male or 0.5m female panel mount to open end
- Mating connector information
- Pin assignment
- Wire definition
- Cable length requirement
- Voltage and current requirement
- Signal and Ethernet requirement
- Shielding requirement
- Cable jacket requirement
- Installation method
- Application environment
- Drawing or sample photo, if available
For PCM-S-0748, please also confirm how the open-end wires will be connected inside the machine, such as PCB soldering, terminal connection, motor internal wiring or control board connection.
Built for Harsh Industrial Environments
Industrial cable assemblies are often installed near motors, servo drives, inverters and moving machine parts. These environments may involve vibration, shock, dust, moisture, electrical noise and temperature changes.
The M23 hybrid cable assembly series is designed for reliable performance in these conditions. With IP67 protection, 360° EMC shielding, anti-shock and vibration-resistant construction, and an operating temperature range of -40°C to +85°C, the cable assembly is suitable for demanding automation and motion control applications.
The shielding design is especially important in servo motor and robot systems, where power lines, encoder feedback, control signals and Ethernet communication may be routed close together. A shielded M23 hybrid cable assembly helps support stable signal and data transmission in electrically noisy environments.
Customization Support from Premier Cable
Premier Cable supports OEM and customized industrial cable assembly projects, including M23 hybrid connector cables, panel mount receptacle cables, open-end flying lead cables and shielded automation cable assemblies.
Available customization support may include:
- PCM-S-0747 M23 male-to-male 2m cable assembly
- PCM-S-0748 M23 female panel mount to open end 0.5m cable
- Customized cable length
- Customized pin assignment
- Customized wire definition
- Shielded cable structure
- CAT5 Ethernet data transmission
- Power and signal hybrid wiring
- Cable jacket material selection
- Connector orientation and installation requirements
- Panel mount connector integration
- Open-end flying lead processing
- OEM cable assembly production
For engineering projects, customers can provide the required pin assignment, mating connector information, cable length, wiring definition or equipment drawing for confirmation.
Common Product Names
This product series may also be searched or specified as:
- PCM-S-0747 M23 male-to-male hybrid cable assembly
- PCM-S-0748 M23 female panel mount to open end cable
- M23 hybrid cable assembly
- M23 power signal data hybrid connector cable
- M23 hybrid connector and cable
- M23 male-to-male cable assembly
- M23 male to male cable 2m
- M23 connector cable male to male
- M23 female panel mount cable
- M23 female receptacle to open end cable
- M23 panel mount to open end cable
- M23 panel mount receptacle with flying leads
- M23 female receptacle with open wires
- M23 connector with flying leads
- M23 open-end cable
- M23 pigtail cable
- M23 unterminated cable
- M23 servo motor cable assembly
- M23 robot cable assembly
- M23 hybrid cable for drive systems
- M23 hybrid cable for robot joint wiring
- M23 power signal Ethernet hybrid cable
These names may vary by market, but they usually refer to M23 industrial cable assemblies designed for combined power, signal and data transmission.
FAQ
How do I choose an M23 hybrid cable assembly?
Choose based on the equipment structure and wiring method. If both devices already have M23 interfaces, choose PCM-S-0747, the 2m M23 male-to-male hybrid cable assembly. If the connector needs to be mounted on a machine panel and wired inside the equipment, choose PCM-S-0748, the 0.5m M23 female panel mount to open end cable.
What is the difference between PCM-S-0747 and PCM-S-0748?
PCM-S-0747 is a 2m male-to-male cable with M23 male connectors on both ends. It is used for external device-to-device connection. PCM-S-0748 is a 0.5m female panel mount to open end cable with an M23 female panel connector on one side and open wires on the other side for internal machine wiring.
What is the model number for the 2m M23 male-to-male hybrid cable?
The 2m M23 male-to-male hybrid cable assembly is Premier Cable model PCM-S-0747. It is used for direct device-to-device connection between equipment with matching M23 interfaces.
What is the model number for the 0.5m M23 female panel mount open-end cable?
The 0.5m M23 female panel mount to open end cable is Premier Cable model PCM-S-0748. It is designed for panel-mounted machine interfaces with open-end wires for internal soldering, crimping or terminal connection.
Can M23 hybrid cables transmit power, signal and Ethernet?
Yes. Depending on the selected configuration, M23 hybrid cable assemblies can support power, signal and CAT5 Ethernet data transmission in one connector system.
What is PCM-S-0747 used for?
PCM-S-0747 is used for direct device-to-device connection. It is suitable for servo drives, servo motors, robot modules, drive systems and industrial automation equipment with matching M23 interfaces.
What is PCM-S-0748 used for?
PCM-S-0748 is used when the connector needs to be fixed on the equipment panel or machine housing, while the open-end wires are connected inside the machine by the customer.
What does open end mean?
Open end means the cable side is supplied without a connector. The individual wires are left open so the customer can solder, crimp or terminate them inside the machine.
What are flying leads?
Flying leads are open wires at the end of a cable. They allow the customer to connect the cable directly to a PCB, terminal block, motor wiring or internal control module.
Can the open-end wires of PCM-S-0748 be soldered inside a servo motor?
Yes. The open-end wires of PCM-S-0748 can be soldered or connected to internal motor wiring, encoder modules, brake wiring, temperature sensor circuits, terminal blocks or control boards.
Can the M23 hybrid connector support Ethernet?
Yes. Depending on the configuration, the M23 hybrid connector can support 4-pin CAT5 Ethernet data transmission together with power and signal lines.
What current and voltage can the M23 hybrid connector handle?
Depending on the selected configuration, the compact M23 hybrid connector can handle currents up to 30A and voltages up to 850V DC or 630V AC.
Is the connector suitable for harsh industrial environments?
Yes. The connector system supports IP67 protection when properly mated and installed, 360° EMC shielding, anti-shock and vibration-resistant performance, and an operating temperature range of -40°C to +85°C.
Can the cable length or pin assignment be customized?
Yes. Cable length, pin assignment, wire definition, shielding structure and connector orientation can be customized according to project requirements.
Why Choose Premier Cable?
Premier Cable provides industrial connector and cable assembly solutions for automation, motion control and machine equipment manufacturers. Our M23 hybrid cable assemblies are designed for customers who need a compact, rugged and customizable connection solution.
