PCL-10162 Compatible 2m DB62 Double-Shielded Cable with Ferrite Cores
A practical guide to PCM-0957, a 2m DB62 male-to-male cable assembly with double shielding and molded ferrite cores for industrial I/O, DAQ, motion control, and automated test equipment.
-
PCM-0957 is a DB62 male-to-male cable assembly designed for industrial I/O, DAQ, control, measurement, and automated test applications.
-
The cable uses 28AWG straight-through conductors, double-layer shielding, molded ferrite cores at both ends, and molded backshell strain relief.
-
Its 2m cable length provides a practical option for users who need more routing flexibility than a short cabinet cable while avoiding unnecessary excess cable.
-
The double-shielded construction and ferrite cores are designed to help reduce the impact of high-frequency electrical noise in industrial equipment environments.
-
Before ordering, buyers should confirm DB62 connector gender, pinout, cable length, screw-lock hardware, shielding requirements, and the mating equipment interface.
Definition: PCM-0957 is a DB62 male-to-male double-shielded industrial cable assembly with 28AWG straight-through wiring and integrated ferrite cores. It is designed for multi-channel I/O, control, data acquisition, test, and measurement equipment that requires a compatible PCL-10162 series cable configuration.
📋 Contents
What Is a PCL-10162 Compatible DB62 Cable?
A PCL-10162 compatible DB62 cable is a multi-channel industrial cable assembly used to connect equipment with DB62 interfaces. It is commonly used between I/O cards, terminal boards, control panels, data acquisition systems, motion-control equipment, and automated test fixtures.
Although a DB62 cable may look similar to a standard D-Sub cable from the outside, the internal wiring, shielding design, conductor specification, drain-wire arrangement, and connector hardware can directly affect whether it is suitable for industrial equipment.
PCM-0957 is designed as an aftermarket compatible cable option for applications using the PCL-10162 series configuration. It uses DB62 male connectors at both ends with straight-through wiring, allowing signals to pass from pin 1 to pin 1, pin 2 to pin 2, and so on, subject to final confirmation of the connected equipment requirements.
PCM-0957 DB62 double-shielded cable assembly
Image 2: DB62 cable with molded ferrite cores at both ends
Why Choose a 2m DB62 Cable?
Cable length is not just a purchasing detail. In industrial cabinets and test systems, the right length can improve cable routing, reduce unnecessary loops, simplify maintenance, and help keep signal wiring separated from high-current power lines.
A 2m DB62 cable is often a practical middle-length option. It can provide more freedom than a short point-to-point cable while avoiding the excess cable management issues that may come with longer assemblies.
| Cable Length Choice | Typical Installation Situation | Why It Matters |
|---|---|---|
| Short cable | Compact control cabinets or close-mounted terminal boards | Keeps wiring neat when both devices are installed near each other |
| 2m PCM-0957 | Medium-distance routing inside cabinets, test racks, equipment frames, or machine panels | Balances routing flexibility with cleaner cable management |
| Long cable | Larger automation systems, separate cabinets, extended test fixtures, or long field routing | Provides reach but may require more attention to cable routing and shielding practices |
Installation Tip: Avoid leaving excessive cable loops near drives, switching power supplies, relays, or high-current wiring. Choosing the right cable length can help make signal routing cleaner and easier to maintain.
Image 3: PCM-0957 2m DB62 cable length and full assembly view
How Double Shielding and Ferrite Cores Help in Industrial Environments
Industrial equipment often operates close to motors, servo systems, switching power supplies, relays, solenoids, variable-frequency drives, and other sources of electrical noise. When one DB62 cable carries many I/O or measurement channels, reducing unwanted interference becomes an important part of reliable system integration.
PCM-0957 combines double-layer shielding with ferrite cores at both ends. The shielding structure is designed to provide a barrier around the conductors, while the ferrite cores are designed to help suppress high-frequency common-mode noise. These features can support more stable operation when installed correctly within an industrial system.
| Cable Feature | Function | Industrial Value |
|---|---|---|
| Foil shielding | Provides broad coverage around the internal conductors | Helps reduce coupling from nearby electromagnetic noise sources |
| Braided shielding | Adds shielding continuity and mechanical protection around the cable core | Useful for industrial routing where cable durability and shield coverage matter |
| Ferrite cores | Add impedance to help suppress high-frequency common-mode noise | Supports cleaner cable performance near electrically noisy equipment |
| Molded backshells | Provide strain relief at the cable-to-connector transition | Helps reduce stress caused by pulling, bending, vibration, and repeated handling |
Important: Cable shielding and ferrite cores can support noise-control performance, but final EMC results depend on the complete installation, including grounding, cabinet design, cable routing, equipment layout, connector bonding, and the electrical environment.
PCM-0957 Product Configuration
Premier Cable PCM-0957 is a black DB62 male-to-male cable assembly for industrial signal and I/O applications. It provides a 2m cable length, 28AWG straight-through wiring, double-layer shielding, molded ferrite cores, and overmolded strain relief.
| Parameter | Specification |
|---|---|
| Premier Cable Part Number | PCM-0957 |
| Product Name | PCL-10162 Compatible 2m DB62 Shielded Cable with Ferrite Cores |
| Connector A | DB62 Male |
| Connector B | DB62 Male |
| Cable Length | 2m Standard Length |
| Conductor Size | 28AWG |
| Wiring | Straight-Through Connection |
| Shielding Structure | Double-Layer Shielding |
| Ferrite Cores | Molded Ferrite Cores on Both Ends |
| Strain Relief | Molded Backshell and Cable Strain Relief |
| Jacket Color | Black |
Compatibility Note: PCM-0957 is designed as an aftermarket compatible cable for PCL-10162 series applications. Before placing an order, confirm the required connector gender, pinout, screw-lock dimensions, cable length, and equipment-specific signal assignment.
Typical Applications for DB62 Shielded Cable Assemblies
A DB62 connector can support many channels in one compact interface, making it useful for systems that require dense I/O, control, signal conditioning, or test connections. PCM-0957 is suitable for applications where a DB62 male-to-male cable with shielding and ferrite-core noise suppression is required.
| Application | How the Cable Is Used | Buyer Focus |
|---|---|---|
| Industrial I/O Systems | Connects I/O cards, terminal boards, control modules, and machine interfaces | Pinout, cable length, shielding, screw-lock hardware |
| Data Acquisition Systems | Used between DAQ cards, signal-conditioning modules, test instruments, and measurement equipment | Signal stability, multi-channel routing, cable management |
| Motion Control Equipment | Supports control, feedback, and I/O wiring in machinery, servo-related systems, robotics, and automation equipment | Noise resistance, cable routing, mechanical durability |
| Automated Test Equipment | Used in functional test fixtures, electronics test systems, production-line testers, and custom ATE platforms | Repeatability, strain relief, custom labeling, batch consistency |
| Industrial Measurement and Control Cabinets | Provides a compact multi-signal interconnection between modules mounted in panels, racks, or equipment enclosures | Correct routing length, shielding continuity, installation space |
Compatibility Checklist Before Ordering
DB62 cables may have a similar connector appearance but different internal wiring, shielding, mechanical hardware, or application requirements. Confirming a few technical details before purchase can help avoid mismatched connectors, incorrect pin assignments, and installation problems.
| Information to Confirm | Why It Matters |
|---|---|
| Connector gender | Confirm whether both mating ports require DB62 male connectors. A DB62 cable may be male-to-male, male-to-female, or female-to-female depending on the system. |
| Pinout and wiring | Confirm whether 1:1 straight-through wiring is required or whether the equipment uses a custom signal mapping. |
| Cable length | Check whether 2m provides enough routing flexibility without leaving excessive cable inside the equipment or cabinet. |
| Screw-lock hardware | Verify that the connector screw-lock type and spacing match the mating equipment interface. |
| Shielding requirement | Important for installations near motors, drives, switching power supplies, relays, and other electrical noise sources. |
| Cable routing environment | Consider bend radius, vibration, cabinet space, proximity to high-power cables, and strain on the connector tail. |
| Equipment model or drawing | Providing a part number, wiring diagram, connector photo, or cable sample helps confirm the correct configuration before production. |
Fast RFQ Tip: Send a connector photo, equipment model, required cable length, pinout, quantity, and application details. This helps confirm whether PCM-0957 is suitable or whether a custom DB62 cable assembly is needed.
Custom DB62 Cable Assembly Options
Premier Cable supports custom DB62 cable assemblies for industrial control, data acquisition, test and measurement, motion control, automation equipment, and OEM device integration. Custom production can be based on a cable sample, technical drawing, wiring diagram, connector photo, or equipment requirements.
Connector Options
-
DB62 male, female, or mixed-gender configurations
-
Custom thumbscrew or screw-lock hardware
-
Overmolded or assembled backshell options
-
Connector labeling and part-number identification
Cable Options
-
Custom cable lengths
-
28AWG or other conductor sizes based on application requirements
-
Shielded, double-shielded, or application-specific cable structures
-
Ferrite-core option for added high-frequency noise suppression support
Assembly Options
-
Straight-through or custom pin assignment
-
Custom cable labels and heat-shrink identification
-
Custom packaging for OEM production
-
Small-batch, prototype, and volume-production support
Frequently Asked Questions
What is PCM-0957 used for?
PCM-0957 is used for multi-channel industrial I/O, data acquisition, motion control, automated test equipment, measurement systems, terminal board connections, and control-cabinet wiring that require a DB62 male-to-male cable assembly.
Is PCM-0957 a DB62 male-to-male cable?
Yes. PCM-0957 uses a DB62 male connector on each end.
What is the standard cable length?
PCM-0957 has a 2m standard cable length. Custom lengths can also be considered according to installation requirements.
Does PCM-0957 use straight-through wiring?
Yes. The standard configuration uses straight-through wiring. Buyers should still verify the required equipment pinout before ordering because some DB62 systems use custom signal assignments.
What do the ferrite cores do?
The molded ferrite cores are designed to help suppress high-frequency common-mode noise. They work together with the cable shielding structure to support cleaner signal transmission in electrically noisy environments.
Can this cable replace a PCL-10162 series cable?
PCM-0957 is designed as an aftermarket compatible cable for PCL-10162 series applications. Confirm connector gender, pinout, cable length, and mechanical fit before ordering.
Can you make a custom DB62 cable?
Yes. Custom DB62 cable assemblies can be made with different lengths, pin assignments, shielding structures, connector genders, cable labels, ferrite cores, and packaging requirements.
Need a DB62 Cable for Industrial I/O or DAQ Equipment?
Premier Cable supplies PCM-0957 DB62 shielded cable assemblies for industrial automation, data acquisition, automated test equipment, motion control, signal measurement, and OEM equipment integration.
-
PCM-0957 DB62 male-to-male shielded cable assembly
-
2m standard length with custom length options
-
28AWG straight-through wiring
-
Double-layer shielding and molded ferrite cores
-
Custom pinout, labeling, connector hardware, and OEM assembly support
Source PCL-10162 Compatible DB62 Cable Assemblies
Premier Cable manufactures DB62 cable assemblies for industrial I/O systems, DAQ equipment, motion control, automated test platforms, industrial control cabinets, and OEM electronic equipment. Send us your part number, drawing, pinout, sample, connector photos, cable length, and estimated quantity to confirm the correct cable configuration.
