100-Pin High-Density Connector
HPDB100 100 Pin SCSI Solder Plug Connector with Metal Backshell
PCM-TAT-0013 is an HPDB100 100-pin high-density cable plug featuring a 1.27 mm (0.050 inch) contact pitch, solder-wire termination and assembled zinc alloy backshell. The connector provides a compact interface for custom high-count signal cables used in data acquisition, test systems, industrial equipment and OEM interconnection applications.
Common Connector Terminology
HPDB100 | 100 Pin SCSI | 0.050 D-Type | Half-Pitch D-Sub
High-Density Interface
100 Positions with 1.27 mm / 0.050 Inch Contact Pitch
The 100-position connector provides a large number of signal contacts within a compact interface. Its 1.27 mm contact pitch allows high-density wiring while reducing the connector footprint compared with conventional full-pitch multi-pin interfaces.
This connector format is commonly used for 100-pin SCSI-style, data acquisition and equipment interconnection cables where many individual signal conductors must be routed through one cable-side connector.
| Positions | 100 Pin |
| Pitch | 1.27 mm / 0.050 inch |
| Termination | Solder Wire |
| Backshell | Assembled Zinc Alloy |
100 Pin
Contact Positions
1.27 mm
Contact Pitch
1.0 A
Current Rating
AC 500 V
Withstand Voltage
Cable-Side Construction
Solder-Wire Termination with Zinc Alloy Backshell
The solder termination design allows individual conductors to be connected according to the required equipment pin assignment, making the connector suitable for application-specific and custom cable assemblies.
An assembled zinc alloy backshell encloses the rear connector and termination area, providing a rigid cable-side housing and a finished connector assembly for equipment installation.
Termination: Solder-Wire Type
Housing: Zinc Alloy Backshell
Construction: Assembly Type
Cable Entry: Suitable for Custom Cable Assembly
Applications
High-Count Signal and Equipment Interconnection
The HPDB100 connector format is suitable for systems that require many individual signal paths through a compact cable interface. Applications range from data acquisition and test equipment to industrial controls and equipment-specific OEM cable assemblies.
Data Acquisition
DAQ devices, interface cables and terminal equipment
Test & Measurement
Measurement systems, test fixtures and laboratory instruments
Industrial Equipment
Control systems and high-density electronic interfaces
OEM Interconnects
Custom equipment cables and replacement assemblies
Custom Configuration
Build HPDB100 into Custom Cable Assemblies
PCM-TAT-0013 can be used as the cable-side connector in custom high-density signal assemblies. Cable construction and wiring can be selected according to the equipment interface and required electrical connections.
| 01 Custom cable length |
| 02 Equipment-specific pin assignment |
| 03 Shielded cable construction |
| 04 Different opposite-end connectors |
| 05 Labeling and OEM assembly options |
Technical Specifications
| Premier Cable No. | PCM-TAT-0013 |
| Connector Type | HPDB100 / 100 Pin High-Density Cable Plug |
| Contact Positions | 100 Pin |
| Contact Pitch | 1.27 mm / 0.050 inch |
| Termination | Solder-Wire Type |
| Backshell | Assembled Zinc Alloy |
| Current Rating | 1.0 A |
| Withstand Voltage | AC 500 V |
| Contact Resistance | 35 mΩ Max |
| Insulation Resistance | 500 MΩ Min |
| Operating Temperature | -55°C to +85°C |
HPDB100 and 100-Pin SCSI Connector Terminology
This 100-position 1.27 mm connector format may be described in the market using terms such as HPDB100, 100-pin SCSI connector, 100-pin 0.050 D-Type connector and half-pitch D-sub connector. Terminology can vary between equipment manufacturers and connector suppliers.
When selecting a connector or cable assembly, verify the connector geometry, contact count, locking structure and equipment pin assignment rather than relying on the connector name alone.
PCM-TAT-0013
Mechanical Drawing
Hot Tags: hpdb100 100 pin scsi 0.050 d-type solder plug connector with metal backshell, China hpdb100 100 pin scsi 0.050 d-type solder plug connector with metal backshell manufacturers, suppliers, factory
