VHDCI High-Density Connector
VHDCI 100 Pin Solder Plug Connector with Zinc Alloy Backshell
PCM-TAT-0015 is a 100-position high-density cable plug featuring a compact 0.80 mm contact pitch, solder termination and an assembled zinc alloy backshell. The connector is designed for custom high-count signal cable assemblies used in test equipment, industrial electronics, laboratory systems and other equipment requiring dense multi-conductor interconnection.
High-Density Interface
100 Contacts in a Compact 0.80 mm Pitch Interface
The 100-position contact arrangement provides a high number of electrical connection points within a relatively compact connector footprint. This makes PCM-TAT-0015 suitable for equipment and cable assemblies where space is limited but a large number of individual conductors must be carried through one interface.
With a contact pitch of approximately 0.80 mm, the connector supports dense signal routing while keeping the overall interface compact compared with conventional larger-pitch multi-pin connectors.
| Contact Positions | 100 Pin |
| Contact Pitch | 0.80 mm |
| Connector Style | Cable Plug |
| Termination | Solder Type |
Electrical Performance
2.0 A
Current Rating
AC 500 V
Withstand Voltage
35 mΩ
Contact Resistance Max
1000 MΩ
Insulation Resistance Min
-55°C to +85°C
Operating Temperature
Metal Backshell
Assembled Zinc Alloy Backshell for Cable-Side Protection
The connector is supplied with an assembled zinc alloy backshell that surrounds the rear termination area. The rigid metal housing provides a more complete cable-side structure than an exposed connector body and helps protect the terminated conductors during handling and equipment installation.
The housing is mechanically assembled around the connector and cable entry, creating a compact finished interface suitable for custom equipment cables and high-density signal assemblies.
Housing: Zinc Alloy
Construction: Assembly Type
Configuration: Cable-Side Plug
Flexible Wiring
Solder Termination for Custom Signal Wiring
The solder termination design allows individual conductors to be connected according to the required equipment pin assignment. This makes PCM-TAT-0015 particularly suitable for custom cable assemblies where wiring configuration, conductor selection and opposite-end connector requirements vary by application.
01
Custom Pin Assignment
Individual conductors can be soldered according to the required equipment pinout and signal arrangement.
02
Cable Selection
Wire construction and cable type can be selected according to conductor count, shielding and application requirements.
03
Assembly Flexibility
Suitable for equipment-specific cables, prototypes, replacement assemblies and customized OEM interconnection.
Application
For High-Count Signal Cable Assemblies
PCM-TAT-0015 can be integrated into custom high-density signal cables where a large number of individual conductors must be routed through a compact connector interface. Typical use cases include test systems, industrial electronics, laboratory equipment and custom OEM interconnection.
|
Test & Measurement Test fixtures, signal interface cables and measurement equipment |
Industrial Electronics Control systems and high-density equipment connections |
|
Laboratory Systems Instrumentation and multi-channel signal interconnection |
OEM Cable Assemblies Equipment-specific wiring and custom replacement cables |
Technical Specifications
| Premier Cable No. | PCM-TAT-0015 |
| Connector Type | VHDCI 100 Pin Cable Plug |
| Contact Positions | 100 Pin |
| Contact Pitch | 0.80 mm |
| Termination | Solder Type |
| Backshell Material | Zinc Alloy |
| Construction | Assembly Type |
| Current Rating | 2.0 A |
| Withstand Voltage | AC 500 V |
| Contact Resistance | 35 mΩ Max |
| Insulation Resistance | 1000 MΩ Min |
| Operating Temperature | -55°C to +85°C |
Custom VHDCI 100 Pin Cable Assembly Support
Premier Cable can use PCM-TAT-0015 as part of custom cable assemblies for equipment integration, replacement and OEM applications.
Cable type, length, conductor arrangement, pin assignment, opposite-end connector, shielding, labeling and overall assembly configuration can be customized according to the application, customer drawing or sample.
PCM-TAT-0015
Mechanical Drawing
Hot Tags: vhdci 100 pin 0.8mm solder connector with metal backshell, China vhdci 100 pin 0.8mm solder connector with metal backshell manufacturers, suppliers, factory
